Products Center
Dual WAN Security Router
Vigor2950 |
|
|
1. Dual-WAN
- Outbound Policy-Based Load-Balance
- BoD (Bandwidth on Demand)
- WAN Connection Fail-over
|
2. WAN Protocol
- DHCP Client
- Static IP
- PPPoE
- PPTP
- BPA
- L2TP *
|
3. Firewall
- SPI ( Stateful Packet Insection
)
- CSM (Content Security Management)
for IM/P2P Application
- Multi-NAT, DMZ Host, Port-Redirection/Open
Port
- Policy-Based IP Packet Filter
- DoS/DDoS Protection
- IP Address Anti-Spoofing
- E-Mail Alert and logging via Syslog
- Bind IP to MAC Address
|
4. VPN
- Up to 200 VPN Tunnels
- Protocol: PPTP, IPSec, L2TP, L2TP
over IPSec
- Encryption: AES, MPPE and Hardware-Based
DES/3DES
- Authentication: Hardware-Based MD5,
SHA-1
- IKE Authentication: Pre-shared Key
and Digital Signature (X.509)
- LAN-to-LAN, Teleworker-to-LAN
- DHCP over IPSec
- NAT-Traversal (NAT-T)
- Dead Peer Detection (DPD)
- VPN Pass-Through
|
5. Bandwidth Management
- Class-based Bandwidth Guarantee
by User-Defined Traffic Categories
- DiffServ Code Point Classifying
- 4-level Priority for Each Direction
(Inbound/Outbound)
- Bandwidth Borrowed
- Bandwidth/Session Limitation
|
6. Network Management
- Web-Based User Interface (HTTP/HTTPS)
- Quick Start Wizard
- CLI (Command Line Interface) / Telnet/SSH*
- Administration Access Control
- Configuration Backup/Restore
- Built-in Diagnostic Function
- Firmware Upgrade via TFTP/FTP
- Logging via Syslog
- SNMP Management with MIB-II
|
7. Content Filter
- URL Keyword Blocking (White list
and Black list)
- Java Applet, Cookies, Active X,
Compressed / Executable / Multimedia
File Blocking
- Web Content Filter (SurfControl)
- Time Schedule Control
|
8. Network Features
- DHCP Client/Relay/Server
- Dynamic DNS
- NTP Client
- Call Scheduling
- RADIUS Client
- DNS Cache/Proxy
- UPnP
- Prot-Based VLAN
- Routing Protocol:
|
|
|
|
Technical
Specifications of Vigor2950 |
| Hardware
Interface |
LAN |
Maximum 5-port 10/100/1000
Base-TX Switch |
| WAN |
2-port 10/100 Base-TX
Ethernet |
| Dual-WAN
|
Outbound Policy-Based
Load-Balance |
| BoD (Bandwidth on
Demand) |
| WAN Connection Fail-over |
| WAN Protocol
|
DHCP Client |
| Static IP |
| PPPoE |
| PPTP |
| BPA |
| L2TP * |
| Firewall
|
SPI ( Stateful Packet
Insection ) |
| CSM (Content Security
Management) for IM/P2P Application |
| Multi-NAT, DMZ Host, Port-Redirection/Open
Port |
| Policy-Based IP Packet
Filter |
| DoS/DDoS Protection |
| IP Address Anti-Spoofing |
| E-Mail Alert and Logging
via Syslog |
| Bind IP to MAC Address |
| VPN
|
Up to 200 VPN Tunnels |
| Protocol |
PPTP , IPSec , L2TP,
L2TP over IPSec |
| Encryption |
MPPE |
| Hardware-Based AES/DES/3DES |
| DHCP over IPSec |
| IKE Authentication: Pre-shared
Key and Digital Signature (X.509) |
| NAT-Traversal (NAT-T) |
| Dead Peer Detection (DPD) |
| VPN Pass-Through |
| LAN to LAN / Teleworker
to LAN |
| Bandwidth
Management |
Class-Based Bandwidth
Guarantee by User-Defined Traffic Categories |
| DiffServ Code Point Classifying |
| 4-level Priority for Each
Direction (Inbound/Outbound) |
| Bandwidth Borrowed |
| Bandwidth/Session Limitation |
| Network
Management |
Web-Based User Interface
(HTTP/HTTPS) |
| Quick Start Wizard |
| CLI (Command Line Interface)
/ Telnet/SSH* |
| Administration Access Control |
| Configuration Backup/Restore |
| Built-in Diagnostic Function |
| Firmware Upgrade via TFTP/FTP |
| Logging via Syslog |
| SNMP Management with MIB-II |
| Content
Filter |
URL Keyword Blocking (White
list and Black list) |
| Java Applet, Cookies,
Active X, Compressed / Executable / Multimedia
File Blocking |
| Web Content Filter (SurfControl) |
| Time Schedule Control |
| Network
Features |
DHCP Client/Relay/Server |
| Dynamic DNS |
| NTP Client |
| Call Scheduling |
| RADIUS Client |
| DNS Cache/Proxy |
| UPnP |
| Prot-Based VLAN |
| Routing Protocol |
Static Routing |
| RIP V2 |
| Max. Power |
22 Watt |
| Dimension |
L273 * W166 * H44.6 (
mm ) |
| Power |
AC 100~240V, 50/60Hz |
|
|
The Vigor2950 is a broadband router with dual-WAN
interface It provides policy-based load-balance, fail-over
and BoD ( Bandwidht on Demand ) , and also integrates
IP layer QoS, NAT session/bandwidth management to
help users control and allocate the bandwidth on networks.
|
By adopting hardware-based VPN platforms, hardware encryption of AES/DES/3DES and hardware key hash of SHA-1/MD5, the router increases
the VPN performance greatly and offers several protocols ( such as IPSec/PPTP/L2TP ) with support for up to 200 VPN tunnels.
The object-oriented design used in SPI ( Stateful Packet Inspection ) firewall allows users to set firewall policies with ease. CSM ( Content Security Management ) enables users to control and manage IM (Instant Messenger) and P2P (Peer to Peer) application more efficiently than before. By the way, Dos/DDoS prevention and URL/Web content filter strengthen the security outside and inside the network.
Figure 3 . Smart VPN Client
/ Firewall Application |
|
|
|
|
Page last modified : 07 November 2010 |